Eppendorf Biological Shakers Innova 44R - Manual (Page 28)

Biological Shakers Innova® 44/44R — Operating manual
28
Tab. 1: Screens
1 See table below, Display Screen Parameters; 2 Optional; 3 Not installed
Screen Name Meaning Features/Modes
DISP Display Shows two user-selectable parameters 1 and actual values.
SUMM Summary Shows all parameters 1 , setpoints and actual values.
SET Set-Up
Set day of week, set time, enable or mute alarm, lock or unlock
operating parameters
LAMP Lamps
Internal chamber light: ON (always on); OFF (always off); AUTO
(default mode), light goes on and stays on when door is open,
shuts off 15 seconds after door is closed, and goes on for 15
seconds when Control Knob is moved. Photosynthetic lights
(GRO)
2 : ON, OFF, NONE 3 , UV Light (UV) 2 : ON, OFF, NONE 3
COMM Communication (RS-232)
SET: set baud rate OFF disables RS-232 MONITOR: PC
commands shaker to read setpoints and actual values on a
schedule determined by PC software. Parameters are unlocked
and can be changed by program or manually. SLAVE: PC controls
shaker and logs data. TALK: Shaker sends setpoint and actual
data to PC at one-minute intervals.
CAL Calibration
Allows user to enter a temperature offset. Allows user to calibrate
speed.
PROG Program Allows user to set up 1 – 4 programs, each with 1 – 15 steps.
7
Feat
ures