Eppendorf Excella E-1 Classic Platform Shaker - Manual (Page 12)

Installation
New Brunswick Excella® E-1 Open Air Shaker
English (EN)
12
4.3 Installing a platform
1. Loosen the four knobs on the SPILL COVER that is bolted to the bearing housing.
Abb. 4-1: Platform installation (top view)
Fig. 4-1: Platform installation (top view)
2. Aligning the four slots in the platform with the four holes in the SPILL COVER, place the platform on
the SPILL COVER.
3. Tighten the knobs to secure the platform.
4.4 Install flask clamp
Flask clamps purchased for use with universal platforms require installation. All clamps are shipped
complete with hardware.
A platform must be installed on the shaker prior to use.
1 Knobs (4)
2 Spill cover
3 Speed dial
1
2
3