3 performance data, Travel speed, Gradeability – JLG 500RTS Service Manual User Manual

Page 10: Turning radius (outside), Lift speed - 400rts, Lift speed - 500rts, Platform capacity - fixed platform, Platform capacity - dual extensions, Machine weight, Machine height (platform lowered)

Advertising
background image

SECTION 1 - SPECIFICATIONS

1-2

– JLG Sizzor –

3120829

NOTE: Wheel lugs should be torqued to 109 Nm (80 ft lb) at

50 hour intervals.

When maintenance becomes necessary or a fas-
tener has loosened, refer to Figure 1-3., Torque
Chart, to
determine proper torque value.

Hydraulic Filter - Inline

Return - Bypass Type

25 Micron Nominal

1.3

PERFORMANCE DATA

Travel Speed

2 Wheel Drive - 5.6 kmh (3.5 mph)

4 Wheel Drive - 4.5 kmh (2.8 mph)

Gradeability

2 Wheel Drive - 25% (14°)

4 Wheel Drive - 45% (24°)

Turning Radius (Outside)

2 Wheel Steer - 4.0 m (13 ft 2 in)

4 Wheel Steer - 2.0 m (6 ft 6 in)

Lift Speed - 400RTS

Up - 42 - 50 seconds

Down - 60 - 70 seconds

Lift Speed - 500RTS

Up - 65 - 80 seconds

Down - 70 - 80 seconds

Platform Capacity - Fixed Platform

400RTS - 905 kg (2,000 lb)

500RTS - 1135 kg (2,500 lb)

Platform Capacity - Traversing Platform
Extension (If Equipped)

400RTS (With Deck Extended)

Machine Capacity - 680 kg (1,500 lb)

Extension - 265 kg (500 lb)

500RTS (With Deck Extended)

Machine Capacity - 905 kg (2000 lb)

Extension - 265 kg (500 lb)

With Deck Retracted

400RTS - 680 kg (1,500 lb)

500RTS - 900 kg (2,000 lb)

Platform Capacity - Dual Extensions

400RTS - 680 kg (1,500 lb)

500RTS - 900 kg (1,984 lb)

Platform Capacity - Wide Deck, Dual
Extensions (500RTS Only)

500RTS - 680 kg (1,500 lb)

Machine Weight

400RTS - Approx. 6,797kg (14,985 lb)

500RTS - Approx. 6,940 kg (15,300 lb)

Machine Height (Platform Lowered)

400RTS - 2.9 m (116 in)

500RTS - 3.15 m (126 in)

Machine Length

4.72 m (15 ft 5 in)

Machine Width

Standard Tires - 2.3 m (7 ft 6 in)

Foam Filled Tires - 2.3 m (7 ft 7 in)

1.4

LUBRICATION

NOTE: Hydraulic oils must have anti-wear qualities at least

to API Service Classification GL-3, and sufficien-
themical stability for mobile hydraulic system ser-
vice. JLG Industries recommends Mobil 424
hydraulic oil, which has an SAE viscosity of 10W-20
and viscosity index of 152.

Table 1-1. Hydraulic Oil

HYDRAULIC SYSTEM OPERATING

TEMPERATURE RANGE

SAE VISCOSITY GRADE

0 to +23 degrees F

(-18 to -5 degrees C)

10W

0 to +210 degrees F

(-18 to +100 degrees C)

10W-20,10W-30

+50 to +210 degrees F

(+10 to +100 degrees C)

20W-20

Advertising
This manual is related to the following products: