JLG E45A_AJ Service Manual - Manual (Page 9)

SECTION 1 - SPECIFICATIONS
3120884 – JLG Lift – 1-1
SECTION 1. SPECIFICATIONS
1.1 CAPACITIES
Hydraulic Oil Tank
19 liters (5 gallons)
Generator Fuel Tank
15.1 liters (4 gallons)
Drive Axle
Torque Hubs - 0.5 liters (19 oz.)
1.2 COMPONENT DATA
Battery Charger
Input, 110 VAC,60 HZ
Output, 48 VDC (25 Amps)
Batteries (8)
6 Volt, 370 AmpHour (20 hour rate)
Drive System
Drive Motor - 48 VDC, 12.5 H.P. @ 3200 rpm. continuous,
rotation - reversible
Drive Brake- spring-applied, hydraulically released
Tires - IN240/55-17.5 pneumatic or foam filled
Tire Pressure - 6.2 Bar (90 psi)
Hydraulic Pump/Electric Motor Assembly
Motor - 48 VDC, 2.14 H.P. @ 2700 rpm.
Pump - 1.6 cm[3]/rev. (0.098 in.[3]/rev.)
Pump Output - 11.2 lpm (2.96 gpm) @ 222 Bar (3200 psi)
1.3 PERFORMANCE DATA
Travel Speed
5.2 kph (3.2 mph)
Gradeability
30% (16.7 degrees)
Turning Radius (Inside)
0.61 m (2ft. 0 in.)
Turning Radius (Curb to Curb)
3.15 m (10 ft. 4 in.)
Tail Swing (Any Position)
0
Upper Boom Speed
Lift Up - 27 seconds
Lift Down - 26 seconds
Lower Boom Speed
Lift Up - 30 seconds
Lift Down - 24 seconds.
Swing Speed - 360 Degrees
90 seconds / rev.
Machine Weight
E45A - 5,811 kg (12,800 lb.)
M45A - 5,811 kg (12,800 lb.)
E45AJ - 6690 kg (14,750 lb.)
M45AJ - 6690 kg (14,750.)
Max. Tire Load
M45A, E45A - 2,767 kg (6100 lbs.).
M45AJ, E45AJ - 3,130 kg (6900 lbs.)
Updated 2-15-00