JLG 400CRT ANSI Operator Manual - Manual (Page 34)

SECTION 4 - MACHINE OPERATION
4-4 – JLG Lift – 3121110
4.7 PARKING AND STOWING
Park and stow the machine as follows:
1. Drive the machine to a reasonably well-protected
and well-ventilated area.
2. Ensure the platform is fully lowered.
3. Position the emergency stop switch to the off posi-
tion.
4. If necessary, cover the instruction placards, caution
and warning decals so that they will be protected
from hostile environment.
5. Chock at least two wheels when parking the
machine for an extended period of time.
6. Turn the power selector switch to off and remove the
key to disable the machine and prevent unautho-
rized use.
4.8 PLATFORM LOADING
The platform maximum rated load capacity is shown on a
placard located on the platform and is based upon the fol-
lowing criteria:
1. The machine is positioned on a smooth, firm and
level surface.
2. All braking devices are engaged.
3. The maximum platform capacity in its standard con-
figuration is as follows:
330CRT - 1000 lb (450 kg)
400CRT - 800 lb (360 kg)
4. The maximum capacity of the manual platform
extension is 250 lb. (120 kg).
NOTE: It is important to remember that the load should be
evenly distributed on the platform. The load should
be placed near the center of the platform when pos-
sible.
Figure 4-1. Grade and Sideslope