JLG 110HX Operator Manual User Manual
Page 70
Advertising
SECTION 4 - MACHINE OPERATION
4-12
– JLG Lift –
3120889
After towing the machine, complete the
following:
1.
Actuate steer/tow selector valve for steering; push
valve knob IN to the actuated position.
2.
Reconnect drive hubs by inverting disconnect cap.
(See Figure 4-5.)
3.
Disconnect towbar from steering hitch and from tow-
ing vehicle. The machine is now in the driving mode.
Figure 4-6. Drive Disconnect Hug
Advertising
This manual is related to the following products: