JLG 860SJ Operator Manual - Manual (Page 115)

SECTION 6 - GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
3121138 – JLG Lift – 6-1
SECTION 6. GENERAL SPECIFICATIONS & OPERATOR MAINTENANCE
6.1 INTRODUCTION
This section of the manual provides additional necessary
information to the operator for proper operation and mainte-
nance of this machine.
The maintenance portion of this section is intended as infor-
mation to assist the machine operator to perform daily main-
tenance tasks only, and does not replace the more thorough
Preventive Maintenance and Inspection Schedule included
in the Service and Maintenance Manual.
Other Publications Available:
Service and Maintenance Manual ............................ 3121139
Illustrated Parts Manual (ANSI, CSA Spec).............. 3121140
Illustrated Parts Manual (Global) .............................. 3121270
Illustrated Parts Manual (CE Spec)........................... 3121842
6.2 OPERATING SPECIFICATIONS
Table 6-1. Operating Specifications - Prior to S/N 0300143294
Maximum Work Load (Capacity)
Unrestricted:
Restricted
500 lb (230 kg)
Refer to Capacity Decals on
machine for restricted platform
capacities
Maximum Capacity - Dual Rating
800S
860SJ
1000 lb. (450 kg)
750 lb. (340 kg)
Maximum Travel Grade (Gradeability)*
2WD
4WD
30%
45%
Maximum Travel Grade (Side Slope)* 5°
Maximum Vertical Platform Height: 800S - 80 ft. (24.3 m)
860SJ - 86 ft. (26.2 m)
Maximum Horizontal Platform Reach
800S
860SJ
71 ft. (21.6 m)
75 ft. (22.9 m)
Turning Radius (outside) 22 ft. 6 in. (6.8 m)
Turning Radius (inside) 12 ft. (3.6 m)