JLG 10MSP (3121229-2013) Parts Manual - Manual (Page 72)

7-4 10MSP 3121229
SECTION 7 ELECTRICAL
FIGURE 7-1. ELECTRICAL COMPONENTS INSTALLATION
ITEM PART NUMBER QTY DESCRIPTION REV
Ref PLATFORM CONTROL BOX COMPONENTS
Ref All Specs to Present & Australian Spec Prior to
SN 0130017845
Use 1001098194 Ref Prior to SN 0130010761 (was p/n 0861768 C
1001098194 Ref SN 0130010761 to Present A
1001137011 Ref Australian Spec (SN 0130017845 to Present) A
1 to 5 Not Used
6 See Note 1 Controller Harness (Note: Not Available for Purchase) B
6A 250201 1 Connector - 10 Position
4461023 9 Socket, Female
6B 7027366 1 Microswitch Harness
7 to 14 Not Used
15 4360567 1 Horn Harness (Includes Horn) B
15A 250206 1 Connector - 2 Position
4461023 2 Socket, Female
16 Not Used
17 4923106 1 Drive/Lift Select Harness B
17A 250200 1 Connector - 6 Position
4461023 3 Socket, Female
18 4923107 1 Emergency Stop Harness A
18A 250206 1 Connector - 2 Position
4461023 2 Socket, Female
19 4923108 1 Keyswitch Harness (All Specs to Present & Australian Spec Prior
to SN 0130017845) A
19A 250206 1 Connector - 2 Position
4461023 2 Socket, Female
20 4923315 1 Power Harness A
20A 4461041 1 Connector - 8 Position
4461023 6 Socket, Female
20B 70001798 1 Connector, Female - 9 Position
70001799 6 Pin, Male
21 1001137026 1 Keyswitch Bypass Harness (Australian Spec Only -
SN 0130017845 to Present) A
21A See Note 1 Connector - 2 Position (Note: Not Available for Purchase)
4461023 2 Socket, Female
Ref CABLES AND CONTROLS INSTALLATIONS
0273551 Ref All Specs Except Australian Spec N
0273551 Ref Australian Spec (Prior to SN 0130017845) N
1001137012 Ref Australian Spec (SN 0130017845 to Present) A
101 to 104 Not Used
105 1320043 3 Clamp, Cable
106 Not Used
107 3020038 AR Grease, Contact
108 to 118 Not Used
119 4923035 1 Mast Harness G
1060927 15.5ft/4.7m Cable, Electrical - 18/12