JLG 460SJ Parts Manual User Manual
Page 22
1-16
SECTION 1 FRAME
217
4751800
4
Flatwasher 1/2in Regular
218
4846070
2
Tie-Rod
219
3780182
2
O-Ring (SN 0300079125 to SN 0300096000 Only) (Bottom
Kingpin Location Only)
220 to 223
Not Used
224
3020029
AR
Grease, Bearing
— — — — — — — — — —
300
2902400
1
Kingpin and Bushings Update Kit for Machines Built Prior to
SN 0300079125 (Includes Newer “SN 0300079125 to
SN 0300096000” Design Items 202, 203, 205, 210 and 219).
See Field Service Bulletin AWP-04-11.
Ref
Note: Newer bushings will fit in “Prior to SN 0300079125”
axles however if kingpin holes measure 1.503in diameter or
larger in any direction, axle weldment must be replaced
before installation of kit.
Note: Spindles require drilling and tapping for 8 additional
kingpin mtg bolts. Newer design kingpins require 4 mtg
bolts each.
401
Ref
FRAME WELDMENT OPTIONS
2360539
400S with 500Lbs Capacity (Prior to SN 0300072506)
2360625
400S with 500Lbs Capacity (SN 0300072506 to
SN 0300076633)
2360650
400S with 500Lbs Capacity (SN 0300076633 to
SN 0300096000)
2360540
400S with 750Lbs Capacity (Prior to SN 0300072506)
2360626
400S with 750Lbs Capacity (SN 0300072506 to
SN 0300076633)
2360651
400S with 750Lbs Capacity (SN 0300076633 to
SN 0300096000)
2360541
460SJ (Prior to SN 0300072506)
2360627
460SJ (SN 0300072506 to SN 0300076633)
2360652
460SJ (SN 0300076633 to SN 0300096000)
2360551
460SJ CE Spec with Pneumatic Tires (Prior to SN 0300072506)
2360628
460SJ CE Spec with Pneumatic Tires (SN 0300072506 to
SN 0300076633)
2360653
460SJ CE Spec with Pneumatic Tires (SN 0300076633 to
SN 0300096000)
FIGURE 1-3. AXLE & STEERING INSTALLATION - 4WD (CONTINUED)
ITEM #
PART NUMBER
QTY.
DESCRIPTION
REV.