JLG 600A_AJ Parts Manual - Manual (Page 340)

7-32 600A 600AJ 3121206
SECTION 7 ELECTRICAL
FIGURE 7-6. HARNESS COMPONENTS INSTALLATION (WITHOUT UGM)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref. NOTE: FOR MODULE IDENTIFICATION, REFER TO REVISION
LOG PAGE A.
Ref. NOTE: MACHINES BUILT WITHOUT UGM ARE ALL USA BUILT
MACHINES.
Ref. PLATFORM BOX HARNESS ASSEMBLY
4922639 Ref. S/N 0300087000 to S/N 0300136623 8/I
1001107753 Ref. S/N 0300136623 to S/N 0300177361 C
1 to 18 Not Used
19 4460866 1 Terminal, 19 Pin Connector
20 4460874 1 Connector - 35 Position (Natural)
21 4460875 1 Connector - 35 Position (Gray)
22 4460873 1 Connector - 35 Position (Black)
23 4460871 70 Socket, Female
24 4460464 7 Pin, Male (16 Gauge)
25 4460879 1 Terminal, Housing 2 Position
26 4460887 2 Terminal, (12 Gauge)
27 to 29 Not Used
30 4460418 9 Connector - 6 Position
31 4460419 27 Terminal, Female
32 4120035 13 Base, Light
33 to 35 Not Used
36 4460225 1 Connector, Male- 6 Position
37 4460227 6 Pin, Male
38 to 40 Not Used
41 4460508 3 Pin, Male (12 Gauge)
42 Not Used
43 4460434 2 Connector - 15 Position
44 2920129 13 Lamp, Indicator
Ref. PLATFORM BOX ASSEMBLY COMPONENTS
101 to 103 Not Used
104 0100048 A/R Grease, Dielectric
105 to 138 Not Used
139 4460428 2 Connector, Strain Relief
140 Not Used
141 4460470 1 Nut, Terminal
142 4460471 1 Lockwasher, Terminal
143 Not Used
144 4460708 2 Connector, Female - 15 Position
145 4460905 5 Seal, Plug
146 Not Used
147 4922639 1 Harness, Platform Console Box (Includes Items 1-44)
148 4922666 1 Harness, Analyzer Cable 2/B
4460226 4 Socket, Female (Not Shown - Located at J2)
148A 4460761 1 Connector, Female - 4 Position
4460227 4 Pin, Male