JLG 26MRT Service Manual - Manual (Page 7)

SECTION 1 - SPECIFICATIONS
3120892 – JLG Sizzor – 1-1
SECTION 1. SPECIFICATIONS
1.1 CAPACITIES
Hydraulic Oil Tank
56.8 liters (15.0 gallons)
Hydraulic System (Including Tank)
Approximately 68.1 liters (18.0 gallons)
Fuel Tank
29.5 liters (7.8 gallons)
Drive Axle
6.4 liters (3 pints)
1.2 COMPONENT DATA
Engine
Daihatsu Gasoline/LP
3 cylinder, liquid-cooled
21 horsepower @ 3,000 rpm
Idle - 1,500 rpm
Mid Engine - 2,000 rpm
High Engine - 3,000 rpm
Alternator - 14 Amp
Cooling System Capacity
Engine - 1.8 liters (1.9 quarts)
Crankcase Capacity - 3.0 liters (3.2 quarts)
Yanmar Diesel
3 cylinder, liquid-cooled
22 horsepower @ 3,000 rpm
Idle - 1,200 rpm
Mid Engine - 2,000 rpm
High Engine - 3,000 rpm
Alternator - 40 Amp
Cooling System Capacity
0.9 liters (1.0 quarts) - engine
Crankcase Capacity - 2.4 liters (2.5 quarts)
Drive Pump
Closed loop piston type
Output - 56.8 lpm (15 gpm) @ 3,000 rpm
Displacement - 19.0 cm3/rev. (1.16 in.3/rev.)
Lift/Steer Pump
Gear type
Output - 11.7 lpm (3.1 gpm) @ 3,000 rpm.
Displacement - 4.0 cm3/rev. (0.24 in.3/rev.).
Steer/Drive System
Steer (Front) Tires - Dico Multi-Trac C/S 26 x 12.00 - 12
NHS; 6 ply; inflate to 2.8 bar (40 psi).
Toe-In - Adjust to 6.4 mm (.25 in) overall.
Drive (Rear) Tires - Dico Tru-Power TL 26 x 12.00 - 12
NHS; 6 ply; inflate to 2.8 bar (40 psi).
Drive Brake - Mico hydraulic multi-disc.
Drive Motor - Eaton 2000 Series; 131 cm3/rev. (8.0 in.3/
rev.).
Drive Axle - Dana Model 44 rigid semi-float, no spin axle
assembly; 5.89 ratio; oil capacity - 1.4 liters (3 pints).
Hydraulic Filter - Inline
Return - Bypass Type
10 Microns Nominal
Platform Size
Standard - 1.4 m x 2.2 m (54 in. x 88 in.)
1.3 PERFORMANCE DATA
Travel Speed
Maximum Speed - 7.2 kmh (4.5 mph)
Elevated Speed - 1.1 kmh (0.7 mph)
Gradeability
35%
Turning Radius
Inside - 2.5 m (8 ft. 1 in.)
Outside - 4.7 m (15 ft. 4 in.)