JLG 660SJ Parts Manual - Manual (Page 171)

3121207 600S 600SJ 660SJ 2-129
SECTION 2 TURNTABLE
FIGURE 2-27. 2500W GENERATOR INSTALLATION - DEUTZ MACHINES (OPTIONAL)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref GENERATOR INSTALLATIONS
Ref USA Built Machines SN 0300087000 to SN 0300139050:
0274082 Ref 110V/60Hz (Available on all Specs Except CE Spec) 3/C
0274090 Ref 110V/50Hz (SN 0300087000 to SN 0300133734) (Available
on ANSI Export, Australian & CE Specs) 1/A
0273045 Ref 110V/50Hz (SN 0300087000 to SN 0300133734) (Available
on CE Spec - UK Only) 1/A
0273085 Ref 110V/50Hz (SN 0300087000 to SN 0300133734) (Available
on CE Spec - Germany Only) 1/A
1001100308 Ref 110V/50Hz (SN 0300133734 to SN 0300139050) (Available
on ANSI Export, Australian & CE Specs) D
0274086 Ref 220V/50Hz (SN 0300087000 to SN 0300133734) (Available
on ANSI Export, Australian & CE Specs) 1/A
1001099868 Ref 220V/50Hz (SN 0300133734 to SN 0300139050) (Available
on ANSI Export, Australian & CE Specs) D
Ref USA Built Machines SN 0300139050 to SN 0300171769:
1001115405 Ref 110V/60Hz (Available on all Specs Except CE Spec) A
1001115410 Ref 110V/50Hz (Available on ANSI Export, Australian & CE
Specs) A
1001115409 Ref 220V/50Hz (Available on ANSI Export, Australian & CE
Specs) A
Ref China Built Machines SN B300000100 to Present:
1001115405 Ref 110V/60Hz (Available on all Specs Except CE Spec) A
1001115409 Ref 220V/50Hz (Available on ANSI Export, Australian & CE
Specs) A
1 3580158 1 Pulley
2 1 Generator Component Options:
2460055 110V/60Hz Generator & Control Box Assembly (0274082
Installation)
2460057 110V/50Hz Generator & Control Box Assembly (0274090
Installation)
2460049 110V/50Hz Generator Only (1001099869, 1001115410,
0273045 & 0273085 Installations which Uses Junction Box or
Switch Box)
2460056 220V/50Hz Generator & Control Box Assembly (0274086
Installation)
1001100321 220V/50Hz Generator Only (1001100308 & 1001115409
Installation which Uses Junction Box)
2A 7012558 1 Generator Only - 110V/60Hz
2460049 1 Generator Only - 110V/50Hz (was p/n 7019679 &
70000129)
1001100321 1 Generator Only - 220V/50Hz (was p/n 7019679 &
70000128)
Ref Note: Replacement Generator come standard with
p/n 3580134 pulley. This pulley may not be correct
for all applications. Refer to pulley options below.
1 Armature with Slip Rings Options:
7026199 Armature with Slip Rings - 110V/60Hz
70000122 Armature with Slip Rings - 110V/50Hz
70000123 Armature with Slip Rings - 220V/50Hz
7012513 4 Cap, Brush Holder