Bushnell Image View 111545 - Manual (Page 9)

9
BasiC setuP
Press 2. MoDe (B) . Press and release the snap button (E) to enter the Setup Menu. Press the Up arrow key
(D) once to highlight “Date & Time”, and press the ok button (D) .
Now set the Date, Month, Year, Hour (24 hr format), Minute and Second, using the 3. Up/Down arrow keys
to make changes, and pressing the SNAP button to lock in the setting and move to the next field.
(Optional) 4. Once you finish setting the date & time, press the ok button. Press and release the SNAP
button to switch from the Setup menu to the Capture menu.
Press the
5. Up arrow key once to highlight “Date Stamp”, press ok, then highlight your preference using
the Up/Down keys: Date Only, Time Only, Date & Time, or leave it on the default “No stamp” (nothing will
be stamped on your photos).
Press
6. ok to confirm your setting, then press the Mode key twice to exit the Capture menu and return to
the “live” preview display.
auto off (power save)
By default, the SyncFocus will automatically turn off if no buttons or controls have been pressed for three
minutes. This helps save power and extend battery life when the camera is accidently left on. However, when
you are first learning to use the camera you may want power to remain on (until you press on/oFF) as you
get familiar with the features and controls. To do this, enter the Setup menu as described above in Step 2
under “Setting the Date...”, highlight “Auto Off”, press ok, and select “Off”. Press ok again, then exit the menu
by pressing Mode.
Menu Display language options (English, French, Spanish, German, Italian, Portuguese, Chinese 1,
Chinese 2)
The Setup menu also has an option to select your preferred language for all menu screens. Once in the Setup
menu, highlight “Language”, press ok, select your preference with the Up/Down arrow keys, press ok, press
Mode.