Buffalo Technology AirStation Pro WLA-AWCG - Manual (Page 70)

67 Troubleshooting
WLA-AWCG User Manual
Cause 3:
The ESS-ID is incorrect.
Solutions:
To correct this, ensure that the ESS-ID on both systems match. The correct
network mode must also be matched with the AirStation Pro. See “Checking the
ESS-ID for Windows 95/98/ME” on page 60 for more information.
Cause 4:
The radio signal is too weak.
Solutions:
To correct this, you must do either or both of the following:
1 Decrease the distance between the LAN PC and the AirStation Pro.
2 Ensure that the line of sight between the LAN PC and the AirStation Pro is
clear.
Cause 5:
The AirStation Pro is still in the process of starting up.
Solutions:
Before carrying out any tasks, you must wait for at least two minutes to allow the
AirStation Pro to power up. This allows the system to initialise.
Cause 6:
When starting Windows 95/98, the password was not entered.
Solutions:
To correct this, you must do the following:
1 Restart the computer.
2 Enter your Username and Password.
3 Click OK.