JLG LiftPOD FS80 (1001070465) - Manual (Page 24)

SECTION 2 - PREPARATION AND INSPECTION
1001070465 LIFTPOD by JLG
2-6 www.liftpod.com
7. Rope Assembly - Check rope is not frayed or damaged
(Figure 2-4.). Ensure it is tensioned tightly and seated
properly around take-up drum (view via carriage inspec-
tion window - see Figure 6-3.). Ensure it is seated cor-
rectly over mast-cap (Figure 2-5.) and at anchor point at
back of mast (Figure 2-6.). Indications that rope needs
replacement include:
1. Frayed or fluffy rope (Figure 2-4.)
2. Braiding no longer visible
3. Sections of rope thinned down in diameter.
8. Manual Descent Crank - Ensure it is present and
securely attached (Figure 2-8.).
9. Powerpack and Control Console (optional) - Ensure it
is properly mounted and secured. Button, triggers and
switches not obscured or damaged; decals secure and
legible; emergency stop switch reset for operation; con-
trol markings legible. Battery is installed and secure.
Figure 2-2. Examples of cracks
Parent Metal Crack Weld Crack
Figure 2-3. Daily Walk-Around Inspection
(Sheet 2 of 2)
5
7
9
10
8
FRONT
REAR
11
6
(FS80 base shown)