Operator unable to control machine, Operator unable to control machine -2, Manual descent crank operation from inside – JLG LiftPOD FS80 (1001070465) User Manual
Page 52: Platform -2, Manual descent crank operation from outside
Advertising
SECTION 4 - EMERGENCY PROCEDURES
1001070465
LIFTPOD by JLG
4-2
www.liftpod.com
Operator Unable to Control Machine
If the platform operator is pinned, trapped or unable to operate or
control the machine other personnel should operate the machine
from ground using the manual descent crank on the lower facing
shaft stub.
Figure 4-1. Manual descent crank operation from
inside platform
Figure 4-2. Manual descent crank operation from
outside platform
Shaft Stub
Advertising
This manual is related to the following products: