JLG LiftPOD FS80 (1001070465) - Manual (Page 30)

SECTION 3 - MACHINE OPERATION
1001070465 LIFTPOD by JLG
3-2 www.liftpod.com
The primary control console is located within the removable and
rechargeable powerpack.
The powerpack is attached to the machine within the platform.
With the installed powerpack, the operator can raise or lower the
platform through its controls.
The machine has a self retracting swivel castor mounted under the
front of the base which retracts out of ground contact when
loaded.
The base of the FS80 machine consists of two fixed wheels and
two adjustable feet, for leveling and stabilizing the base within 2
degrees of level from front and back only. Prior to operation the
adjustable feet are to be engaged to a point where the base is
level as seen on the level bubble (Figure 3-8.).
The base of the FS60 machine consists of two rotating castors
and two adjustable feet. Prior to operation the adjustable feet are
to be engaged to a point where the base is level as seen on the
bubble level. Also, the castor wheels must be locked prior to oper-
ation.
Detailed Description
Figure 3-2. Base frame component description - FS80
Fixed Wheel
Adjustable Foot
Self Retracting Swivel Castor Adjustable Foot
Fixed Wheel
Carriage Rests
Mast Stump
Level Bubble
Retracting Castor
Release Lever
FRONT
(travel stops)
Step Plate