JLG LiftPOD FS80 (1001070465) - Manual (Page 41)

SECTION 3 - MACHINE OPERATION
LIFTPOD by JLG 1001070465
www.liftpod.com 3-13
Always charge the battery for 12hrs for first charge. Batteries will
take several full charge/discharge cycles before they reach their
peak performance.
Fast Charge Indicator Light Guide
SOLID GREEN: Insert battery or remove fully charged battery
FLASHING GREEN: Battery is charging.
SOLID RED: Charging is temporarily halted to allow battery to
cool down. Charging will continue automatically.
FLASHING RED: Please reinsert battery. If the red light continues
to flash, the battery or the charger may be faulty.
To troubleshoot whether the battery or the charger is at fault, insert
another battery. If this battery charges, the other battery is faulty
and must not be used. If the red light continues to flash, the
charger is faulty.
3.5 Operation
Cordless Drill
1. Drive Socket (optional)
2. Chuck
3. Torque Control (optional)
4. Power Trigger
5. Speed Controller (optional)
6. Drill/Hammer Function Selector (optional)
Figure 3-18. Typical cordless drill interface devices
7
3
2
8
5
6
1
4