Platform caught overhead, Platform caught overhead -3, Releasing the drive interlock using the lanyard -3 – JLG LiftPOD FS80 (1001070465) User Manual

Page 53

Advertising
background image

SECTION 4 - EMERGENCY PROCEDURES

LIFTPOD by JLG

1001070465

www.liftpod.com

4-3

NOTICE

IF THE OPTIONAL POWERPACK IS NOT INSTALLED, USE THE LANYARD
IN THE PLATFORM TO SECURE THE DRIVESHAFT IN A DEPRESSED
(PUSHED-IN) POSITION, RELEASING THE DRIVE INTERLOCK. WHEN
USING THE LANYARD, THE MANUAL DESCENT CRANK SHOULD BE
USED AS SHOWN IN FIGURE 4-2.
NEVER USE A POWER TOOL TO

LOWER THE MACHINE FROM BELOW WHEN USING THE LANYARD.

DO NOT ACTIVATE THE POWERPACK WHILE THE MANUAL DESCENT
CRANK IS ATTACHED.

Platform Caught Overhead

If the platform becomes jammed or snagged in overhead struc-
tures or equipment, rescue the platform occupant prior to freeing
the machine.

Rescue equipment can be used to remove the platform occupant.
Cranes and forklifts can be used to stabilize motion of the
machine.

Figure 4-3. Releasing the drive interlock using the

lanyard

Advertising
This manual is related to the following products: