JLG 800A_AJ ANSI Parts Manual - Manual (Page 273)

3120741 7-25
SECTION 7 ELECTRICAL
S
E
C
T
I
O
N
7
E
L
E
C
T
R
I
C
A
L
807 4921829 Generator to Rear of Boom Harness (110V) 1
4921955 Generator to Rear of Boom Harness (220V) 1
Note: Harness used to connect AC at platform
harness to generator receptacle to power platform
receptacle. Ref
1060494 Cable, Electrical - 12/3 26ft/8m
807A 4460205 Plug, Male (110V) 1
4460233 Plug, Male (220V) 1
807B 4460134 Receptacle, Female (110V) 1
4460701 Receptacle, Female (220V) 1
808 See Note Lights Harness (Note: Not Available for Purchase.) 1
1060341 Cable, Electrical - 16/2 37ft/11.3m
808A 3740049 Relay 1
808B 4922484 Harness, Bag (Located at to Box) (Not Shown) 1
809 2920140 Platform Worklights Harness (Includes Light and Wire
Only) 2
2820035 Loom, Vinyl 9ft/2.8m
809A 4460598 Connector, Strain Relief 1
809B 4360232 Circuit Breaker, 15Amp 1
810 See Note Soft-Touch System Harness (Note: Not Available for
Purchase.) 1
810A 1060341 Cable, Electrical - 16/3 16ft/4.9m
810B 4460425 Connector, Strain Relief 1
TOOLS Ref
901 7002821 Crimper (For Wire to Pin/Socket Connections) 1
902 7002823 Extractor (For Removal of Pin/Socket from Connectors) 1
903 4460467 Extractor, Pin (Blue 16-18 Gauge) (For Removal of Pin/
Socket from Connectors) 1
4460510 Extractor, Pin (Yellow 12-14 Gauge) (For Removal of
Pin/Socket from Connectors) 1
904 7002828 Stripper, Wire 1
905 2901443 Analyzer Kit (Not Shown) 1
FIGURE 7-3. HARNESS COMPONENTS INSTALLATION (WITH ADE SYSTEM) (SN 0300064009
ONLY)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.