Buffalo Technology LINKSTATION HS-DGL - Manual (Page 6)

6
The LinkStation name
will be required to access
LinkStation. A friendly, easy
name is recommended.
Enter a suitable name in the
‘ LinkStation Name ’ fi eld.
Feel free to use your fi rst or
last name, a description of
the data to be installed on
LinkStation, or simply name it LinkStation. Enter a short description of
LinkStation in the ‘ LinkStation Description ’ fi eld. Once completed,
press the ‘ Apply ’ button.
By default there are two shares
on LinkStation. If you would
like to create additional shares
for specifi c users or specifi c
types of data, then click on the
‘ Security ’ tab. Then click on
the ‘ Shared Folder Setup ’ link.
From this confi guration page
you can add new shares or edit
existing shares.Press the ‘ Add
a New Folder ’ button to begin creating a new shared folder.
To begin setting up a new
share, enter an appropriate
share/folder name in the
‘ Shared Folder Name ’
fi eld. Enter a description
of the share in the ‘ Shared
Folder Description ’ fi eld. It
is recommended to leave the
remaining settings in their
default state. Please refer
to the User Manual on the
LinkNavigator CD-ROM before
changing any of these settings. Press the ‘ Apply ’ button when fi nished.
Please repeat this step to create additional shares.