JLG 860SJ Parts Manual - Manual (Page 214)

7-8 800S 860SJ 3121632
SECTION 7 ELECTRICAL
217 1 Harness Assembly - Main Boom (12/4 -18/8) Options:
4922566 800S 2/B
1001091618 800S (With Arctic Package) 1/A
4922567 860SJ 3/C
4923595 860SJ (With Arctic Package) 1/A
AR Cable, Electrical - 12/4&18/8 Options:
1060896 85ft/26m 800S
4923462 85ft/26m 800S (With Arctic Package)
1060896 95ft/29m 860SJ
4923462 95ft/29m 860SJ (With Arctic Package)
2820031 4in/9cm Heat Shrink
217A 4460465 11 Socket, Female 18 Gauge
217B 4460865 1 Connector - 19 Position
217C 4460509 4 Socket, Female 12 Gauge
217D 4460473 1 Clamp. Cable
217E 4460466 8 Seal, Plug
217F 4460464 11 Pin, Male 18 Gauge
217G 4460508 4 Pin, Male 12 Gauge
218 1 Harness Assembly - Tower Boom (12/4 - 18/8) Options:
4922569 Without Arctic Package 1/A
4923596 With Arctic Package 2/B
20ft/6.1m Cable, Electrical - 12/4&18/8 Options:
1060896 Without Arctic Package
4923462 With Arctic Package
218A 4460465 22 Socket, Female 18 Gauge
218B 4460865 2 Connector - 19 Position
218C 4460509 8 Socket, Female 12 Gauge
218D 4460473 2 Clamp. Cable
218E 4460466 8 Seal, Plug
219 to 228 Not Used
229 1 Holding Valve/Lift Dump Harness Assembly Options:
(Note: This is actually two separate harnesses under the
same p/n)
4922660 1 Without Arctic Package E
4923597 1 With Arctic Package 1/A
229A 4460880 2 Connector, DIN
229B 4460320 1 Plug, Male - 2 Position
4460226 2 Socket, Female
229C 4460424 1 Connector, Female - 2 Position
4460267 2 Pin, Male
230 Not Used
231 1 Harness, 110V A/C (To Bulkhead) Options :
800S:
4922873 All Specs Except Australian & CE Specs
4922875 Australian & CE Specs Only
Use 1001121670 All Specs Except Australian & CE Specs (Harness, 8/5
Cable - With 7500W Generator) (was p/n 4922790)
1001091620 All Specs Except Australian, CE & Japanese Specs
(Harness, 8/5 Cable - With Arctic Package)
FIGURE 7-2. HARNESS COMPONENTS INSTALLATION (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.