JLG G6-42A Parts Manual - Manual (Page 168)

ENGINE & ATTACHING PARTS
G6-42A 91474001 4-42
Figure 4-8 Fuel Tank & Lines
PAP22090
1
5
2
4
6
3
216
219
208
4
101
104
302
102
301
102
103
220
101 302
301
8
9
7
9
BEFORE S/N 0160045081
S/N 0160045081 & AFTER
OPTIONAL
LOCKING CAP
OLD
VERSION
NEW
VERSION
NOTE: WHEN USING FUEL CAP ADAPTER KIT, 2902446 OR OLD VERSION LOCKING CAP
1. COAT ALL THREADS OF ADAPTER (ITEM 301) & SET SCREWS (ITEM 303) WITH LOCTITE ® 641 TM (14404978)
BEFORE INSTALLING FILLER NECK ADAPTER.
2. HAND TIGHTEN SET SCREWS JUST UNTIL RESISTANCE IS FELT. OVERTIGHTENED SCREWS WILL DISTORT
PLASTIC THREADS.
NOTE: NEW VERSION
1. APPLY LOCTITE ® 30512 TM (0100093) ON ALL
ADAPTER THREADS UP TO GASKET START AT
BOTTOM OF THE THREADS; 360 DEGREE. AIR DRY
FOR 3 TO 4 MINUTES ON BOTH MATING PARTS.
2. APPLY 1/2 IN. ALL THE WAY AROUND THE
FILLER NECK THREADS. APPLY THE ADAPTER TO
THE FILLER NECK ON THE TANK.
3. ONCE ASSEMBLED, NO FUEL SHOULD BE
ADDED FOR 8 HOURS.
S/N 0160020148 thru 0160040659