Bernina Sergers - Manual (Page 122)

Mastering
Your
BERNINA ®
BERNINA ® Sergers
M
ASTERING
Y
OUR
BERNINA ® S
ERGER
2/15/03 122
Notes
©2003 BERNINA® of America, Inc. Permission to copy granted only to Authorized BERNINA ® Dealers
Attaching Lace
Use spray starch or fabric stiffener to stabilize the fabric and lace.
Position the lace on the right side of the fabric with the scalloped edge
of the lace even with the left side of the fabric.
Place fabric and lace under the needles with the lace header positioned
even with the inside edge of the right floating toe.
Coverstitch the lace to the fabric.
Trim fabric from beneath the lace.
Trim and mount sample.
Fabric ........................................................ mediumweight cotton, 3” x 6”
.............................................................. 8” length of 1” wide lace edging
Needle ............................................................................. 80/12 Universal
Thread ................................................................... 3 cones serger thread
Presser Foot .......................................................................... Coverstitch
Stitch ................................................................ wide 3-thread coverstitch