JLG E45A_AJ ANSI Operator Manual - Manual (Page 19)

SECTION 2 - PREPARATION AND INSPECTION
3120764 – JLG Lift – 2-3
4. Check footswitch for damage, loose or missing parts
and security. Assure that footswitch functions prop-
erly and that wiring has no defects or chafing.
5. Check Platform Rotator mechanism for proper oper-
ation, damage, and security.
NOTE: Check all DANGER, WARNING, CAUTION, and
INSTRUCTION placards for legibility and security on
the entire machine.
TO AVOID INJURY, DO NOT OPERATE MACHINE IF ALL PLAC-
ARDS ARE NOT ON MACHINE OR ARE DEFACED AND NOT
READABLE. USE OF MACHINE WITHOUT CORRECT PLACARDS
IS A SAFETY VIOLATION.
Figure 2-1. Basic Nomenclature