Shutdown procedure, Shutdown procedure -3, Position of least backward stability -3 – JLG 660SJ Operator Manual User Manual
Page 61
SECTION 4 - MACHINE OPERATION
3121205
– JLG Lift –
4-3
4. From Platform, pull POWER/EMERGENCY STOP switch
out, then push the ENGINE START switch until engine
starts.
NOTE:
Footswitch must be in released (up) position before
starter will operate. If starter operates with footswitch in
the depressed position, DO NOT OPERATE MACHINE.
Shutdown Procedure
IF AN ENGINE MALFUNCTION CAUSES AN UNSCHEDULED SHUTDOWN,
DETERMINE THE CAUSE AND CORRECT IT BEFORE RESTARTING THE
ENGINE.
1. Remove all load and allow engine to operate at low
speed for 3-5 minutes; this allows further reduction of
internal engine temperature.
2. Push POWER/EMERGENCY STOP switch in.
3. Turn Select switch to Off.
Refer to Engine Manufacturer’s manual for detailed informa-
tion.
Figure 4-1. Position of Least Backward Stability