JLG 660SJ Operator Manual - Manual (Page 57)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3121205 – JLG Lift – 3-21
9. AC Generator (Green)
Indicates the generator is in operation.
10. Soft Touch Indicator (If Equipped)
Indicates the Soft Touch bumper is against an object. All
controls are cut out until the override button is pushed,
at which time controls are active in the Creep mode.
11. Creep Speed Indicator
When the Function Speed Control is turned to the creep
position, the indicator acts as a reminder that all func-
tions are set to the slowest speed.
12. Drive Orientation Indicator
When the boom is swung beyond the rear drive tires or
further in either direction, the Drive Orientation indicator
will illuminate when the drive function is selected. This is
a signal for the operator to activate the Drive Orientation
Override Switch and verify the drive control direction is
correct.