JLG 601S ANSI Parts Manual - Manual (Page 23)

3120747 601S 1-15
SECTION 1 FRAME
FIGURE 1-4. TIRE AND WHEEL DRIVE INSTALLATIONS (S/N 85132 TO PRESENT)
ITEM # PART NUMBER QTY. DESCRIPTION REV.
0273048 Ref. WHEEL DRIVE INSTALLATION (4WD) J
1 0100011 A/R Loctite #242
2 Not Used
3 0681810 8 Bolt 1/2”-13NC x 1 1/4” (Grade 8)
4 0682016 24 Bolt 5/8”-11NC x 2” (Grade 8)
5 2780269 4 Drive Hub Assembly (See Figure 1-7 for Breakdown)
6 Use 3160350 4 Drive Motor Assembly (Prior to S/N 98765 p/n was 3160300 - See
Figure 1-10 for Breakdown) (S/N 98765 to Present p/n 3160350 -
See Figure 1-11 for Breakdown)
7 3300106 36 Nut, Wheel
8 Not Used
9 4 Hardware Options:
3790045 O-Ring (Prior to S/N 102229)
3960526 Gasket (S/N 102229 to Present)
10 to 11 Not Used
12 4891800 8 Flatwasher 1/2”
13 4740393 24 Flatwasher 5/8” Hardened
Ref. TIRE AND WHEEL INSTALLATIONS
4520328 Ref. IN355/55D625 Pneumatic 1
4520346 Ref. IN355/55D625 Foam-Filled 1
Ref. Note: Assemblies may require ballast/foam filling to
manufacturer’s specifications prior to installing on a
machine. Refer to Operation & Safety or Service &
Maintenance Manuals. Purchase individual tire and/or rim
only if able to foam fill tire & wheel assembly, otherwise, pur-
chase complete assembly.
4520289 2 IN355/55D625 Pneumatic Left Side
4520290 2 IN355/55D625 Pneumatic Right Side
4520344 2 IN355/55D625 Foam-Filled Left Side
4520345 2 IN355/55D625 Foam-Filled Right Side
101 4520288 1 Tire 14-17.5 Options:
102 4860287 1 Rim, Wheel
103 4640113 1 Valve, Air
104 1702740 1 Decal - 95 PSI