JLG 60HA ANSI Parts Manual - Manual (Page 221)

3120656 4-11
SECTION 4 PLATFORM
S
E
C
T
I
O
N
4
P
L
A
T
F
O
R
M
0235238 ROTATOR ASSEMBLY: Ref. E
Note: For Machines Built Prior to September 1991
refer to Service Information Bulletin #91-5 for
required upgrade. Ref.
101 3160083 Rotator Motor Assembly (See Figure 4-3 for Break-
down) 1
102 0080099 Adapter, Motor 1
103 2760064 Housing, Gear 1
104 0440134 Bearing, Sleeve 2
105 4740199 Washer, Thrust 4
106 0440120 Bearing, Thrust 2
107 2440043 Gear, Worm 1
108 3440816 Rollpin 1/4” x 1” 4
109 0080098 Adapter, Motor to Worm Gear 1
110 2440044 Gear, Worm 1
111 4740256 Washer, Thrust 2
112 0440135 Bearing, Sleeve 1
113 1760068 Disc, Brake 1
114 Not Used
115 3931010 Bolt, Socket Head #10-24NC x 5/8” 5
116 3441228 Rollpin 3/8” x 1 3/4” 2
117 3931620 Bolt, Socket Head 3/8”-16NC x 1 1/4” 2
118 4761600 Lockwasher 3/8” 6
119 3931612 Bolt, Socket Head 3/8”-16NC x 3/4” 4
120 4070585 Shim .010 A/R
121 4070586 Shim .005 A/R
122 4070587 Shim .002 A/R
123 0100019 Loctite #271 A/R
124 0100021 Primer A/R
125 2160001 Fitting, Grease - 90° 1
126 3020025 Grease A/R
PLATFORM WELDMENTS Ref.
Note: Replacement decals must be ordered sepa-
rately - See Section 8. Ref.
201 Low Mount Platform Options: 1
Note: Use Regular Platform for Machines with
soft-touch (Chain-Attached Bumper) System Ref.
30” x 48” Platforms:
3510239 Platform
3510323 Platform with Welded-on Bumpers
30” x 60” Platforms:
3510240 Platform
3510480 Platform with Mesh to Mid Rail
3510482 Platform with Mesh to Top Rail
3510261 Platform with Welded-on Bumpers
FIGURE 4-2. LOW MOUNT PLATFORMS AND FOOTSWITCH INSTALLATIONS (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.