JLG 1250AJP Parts Manual - Manual (Page 233)

SECTION 4 - PLATFORM
3121172 1250AJP 233
FIGURE 4-1. PLATFORM COMPONENTS INSTALLATION
ITEM PART NUMBER QTY DESCRIPTION REV
Ref PLATFORM ASSEMBLIES
Ref 8ft (2.44m) with No Mesh
3510822 Ref Platform, 36X96 Gate (Use p/n 1001144023) (Prior to SN
0300168212) J
1001144023 Ref Platform, 36X96 Gate (SN 0300168212 to Present) B
Ref 6ft (1.83m) with No Mesh
3510833 Ref Platform, 36X72 Gate (Use p/n 1001144024) (Prior to SN
0300168212) I
1001144024 Ref Platform, 36X72 Gate (SN 0300168212 to Present) B
Ref Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See SPECIAL OPTIONS SECTION for
Mesh Installations.
Ref Note: For Fall Arrest Platform Machines See SPECIAL
OPTIONS SECTION.
Ref Note: Replacement Decals Must Be Ordered Separately -
See DECALS SECTION.
Ref Note: When replacing 8ft/2.44m platform with Soft Touch
option, new Soft Touch Rail p/n 4846673 must be
purchased to accommodate limit switch locations.
Ref Note: When replacing platform on machines with SkyCutter
option, new bracket p/n 1001145405 must be purchased to
accommodate SkyCutter components.
2 2080040 16 Fastener, Huck
3 2600281 2 Hinge, Self-Closing
4 2940074 1 Latch
6 See Note 1 Platform Weldment (Note: Not Available - Purchase Platform
Assembly)
7 Ref Cap-Plug Options:
7 3520072 1 Plug-Spec, Cap (Prior to SN 0300162288)
7 1001144630 1 Cap, Square Tubing (SN 0300162288 to Present)
8 3820020 4 Rivet
10 Ref Gate Weldment Options:
10 4846452 1 Weld, Platf. Gate (Prior to SN 0300162288)
10 1001144629 1 Gate, Weldment (SN 0300162288 to Present)
11 3520198 2 Square Tube - Plug
Ref PLATFORM ASSEMBLY WITH DROP-BAR
Ref 6ft x 3ft (1.83m x .91m)
1001138434 Ref Platform, 36X72 Dropbar, (Use p/n 1001144021) (Prior to SN
0300168212) B
1001144021 Ref Platform, 36X72 Dropbar (SN 0300168212 to Present) B
Ref 8ft x 3ft (2.44m x .91m)
1001138430 Ref Platform, 36X96 Dropbar, (Use p/n 1001144022) (Prior to SN
0300168212) B
1001144022 Ref Platform, 36X96 Dropbar (SN 0300168212 to Present) B
Ref Note: Replacement Decals Must Be Ordered Separately -
See DECALS.
Ref Note: When replacing 8ft/2.44m platform with Soft Touch
option, new Soft Touch Rail p/n 4846673 must be
purchased to accommodate limit switch locations.
Ref Note: When replacing platform on machines with SkyCutter
option, new bracket p/n 1001145405 must be purchased to
accommodate SkyCutter components.
51 0100011 AR Compound, Locking