JLG 500RTS ANSI Parts Manual - Manual (Page 140)

3-12 400RTS 500RTS 3120697
SECTION 3 SCISSORS ARMS
39 0200494 1 Arm Weldment (2nd Outboard - Left Side)
0961731 3 Bushing, Bronze
40 1 Pin, Pivot Options:
3422154 Standard
3422172 CSA
41 2 Pin, Pivot Options:
3422158 Standard
3422171 CSA
42 0200506 1 Arm Weldment (4th Outboard - Left Side)
0961731 3 Bushing, Bronze
43 0200518 1 Arm Weldment (3rd Outboard - Left Side)
0961731 3 Bushing, Bronze
44 1320095 1 Clamp, Hose (Not Shown)
45 2 Washer, Thrust Options:
4740310 Standard
Not Required CSA
— — — — — — — — — —
0100011 A/R Loctite, #242
2901328 1
Arm Kit, Complete (Includes Items: 1,2,3,4,5, 6,7,8,9,10 and 14)
Not Shown
0254272 Ref. HOSE CLAMP ASSEMBLY 4
101 A/R Clamp, Hose Options:
1320162 7 Prior to S/N 70211
1320061 10 S/N 70211 to Present
102 A/R Bolt Options:
0641522 7 Bolt 5/16"-18 x 2 3/4" (Prior to S/N 70211)
0641510 6 Bolt 5/16"-18 x 1 1/4" (S/N 70211 to Present)
103 4751500 10 Flatwasher 5/16"
104 4761500 7 Lockwasher 5/16" (Prior to S/N 70211)
105 3311505 10 Locknut 5/16"
106 4060806 1 Ft. Shield, Flex Trim (Not Shown) (Prior to S/N 101987)
107 2820025 66 Ft. Plastic, Spring Guard (Not Shown)
108 1320270 13 Clamp (S/N 70211 to Present)
109 0641512 4 Bolt 5/16”-18NC x 1 1/2” (S/N 70211 to Present)
0252588 Ref. ARM PADS 3
201 32 Pad, Polyurethane Options:
3340645 Prior to S/N 47175
3340841 S/N 47175 to S/N 50806
3340848 S/N 50806 to Present
FIGURE 3-3. SIZZORS ARMS INSTALLATION - 500RTS (PRIOR TO S/N 27997) (CONTINUED)
ITEM # PART NUMBER QTY. DESCRIPTION REV.