JLG 150HAX Parts Manual - Manual (Page 13)

3120812 150HAX 1-7
SECTION 1 FRAME
FIGURE 1-2. TIRE AND WHEEL DRIVE INSTALLATIONS
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref. WHEEL DRIVE INSTALLATION
0251946 Ref. Prior to S/N 0300057155 7/E
0270229 Ref. S/N 0300057155 to S/N 0300137333 3/A
1001107574 Ref. S/N 0300137333 to Present B
1 4 Drive Hub Assembly Options:
Use 1001116796 Prior to S/N 141512 (was p/n 2780155) (See Figure 1-3 for
Breakdown)
1001116796 S/N 141512 to Present (See Figure 1-4 for Breakdown)
2 4 Brake Assembly Options (See Figure 1-5 for Breakdown):
0920084 Prior to S/N 33476
0920110 S/N 33476 to S/N 57155
0920119 S/N 57155 to Present
3 4 Motor Assembly Options:
3A See Note Prior to September 1995 (was p/n 3160176) (See Figure 1-6
for Breakdown)
Note: Use p/n 3160213 Motor Plus p/n 2900869
Conversion Kit as Replacement.
Use 3160204 September 1995 to S/N 0300027450 (was p/n 3160213) (See
Figure 1-6 for Breakdown)
3B 3160204 S/N 0300027450 to S/N 0300137333 (See Figure 1-6 for
Breakdown)
1001107852 S/N 0300137333 to Present (See Figure 1-7 for Breakdown)
4 8 Stud Options:
4300092 1/2”-13NC x 5 1/2” (Prior to S/N 0300137333)
4300097 1/2”-13NC x 5 1/8” (S/N 0300137333 to Present)
5 4761800 8 Lockwasher 1/2”
6 4751800 8 Flatwasher 1/2”
7 3311801 8 Nut 1/2”-13NC
8 0100011 A/R Compound, Locking
9 0642216 48 Bolt 3/4”-10NC x 2”
10 4762200 48 Lockwasher 3/4”
11 3300007 48 Lugnut 3/4”-16NF
0251590 Ref. TIRE AND WHEEL INSTALLATION 2
12 0251589 4 Tire and Wheel Assembly - Foam Filled 445/65R 22.5
Ref. Note: Assemblies may require ballast/foam filling to
manufacturer’s specifications prior to installing on a
machine. Refer to Operation & Safety or Service &
Maintenance Manuals. Purchase individual tire and/or
rim only if able to foam fill tire & wheel assembly, other-
wise, purchase complete assembly.
4520136 4 Tire, Replacement