JLG 80H Parts Manual - Manual (Page 249)

3120272 2-163
S
E
C
T
I
O
N
2
T
U
R
N
T
A
B
L
E
SECTION 2 TURNTABLE
FIGURE 2-42. LP TANKS INSTALLATION
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
LP TANKS INSTALLATIONS Ref.
Note: For U/L Machines See Section 10.
0236674
LP TANKS INSTALLATION - TURNTABLE
MOUNTED
Ref. F
1 0901345 Bracket 1
2 Clamp Options: 1
1320023 Prior to May 1994
1320126 May 1994 to Present
3 Not Used
4 4300045 Stud (Welded on Part) 4
5 4751800 Flatwasher 1/2" 8
6 4761800 Lockwasher 1/2" 4
7 3311801 Nut 1/2"-13NC 4
8 0641508 Bolt 5/16"-18NC x 1" 2
9 4751500 Flatwasher 5/16" 2
10 4761500 Lockwasher 5/16" 2
11 3311501 Nut 5/16"-18NC 2
12 to 13 Not Used
14 2540003 Grommet (Not Shown - Located in Hood) 4 in./10cm
15 0100001 Adhesive (Use with Item 14) A/R
0238916 LP TANKS INSTALLATION - FRAME MOUNTED Ref. D
0236674
LP TANKS INSTALLATION - FRAME MOUNTED (80H
ONLY)
Ref. F
101 0900935 Bracket 1
102 Clamp Options: 1
1320023 Use with 0238916 Installation
1320126 Use with 0236674 Installation
103 4300034 Stud (Welded on Part) 4
104 4751600 Flatwasher 3/8" 4
105 4761600 Lockwasher 3/8" 4
106 3311601 Nut 3/8"-16NC 4
107 1320127 Toggle and Nut Clamp (80H Only) 1
108 3200332 Mount, LP Tank (80H Only) 1
109 0641403 Bolt 1/4"-20NC x 3/8" (80H Only) 2
110 4761400 Lockwasher 1/4" (80H Only) 2
LP TANK OPTIONS: Ref.
200 4400275 Tank - 43.5 Lb. Liquid Withdrawal (Alum.) 2
4400420 Tank - 43.5 Lb. Liquid Withdrawal (Steel) 2
4400038 Tank - 43.5 Lb. Vapor Withdrawal 2