JLG 45HA Parts Manual - Manual (Page 87)

3120824 2-27
S
E
C
T
I
O
N
2
T
U
R
N
T
A
B
L
E
SECTION 2 TURNTABLE
FIGURE 2-9. TURNTABLE, BEARING AND SWING DRIVE INSTALLATION
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.
TURNTABLE OPTIONS Ref.
Ford & Deutz Powered Machines: Ref.
4620051 6’-6”/2m Wide Machines Built through 1992
4620079 6’-6”/2m Wide Machines Built 1993 to Present
4620105 6’-6”/2m Wide Machines with 12" x 16.5" Tires
4620064
6’-6”/2m Wide Machines Built through 1992 and with
2:1 Counterweighting
4620080 6’-6”/2m Wide Machines with Built 1993 to Present
and with 2:1 Counterweighting
4620080 5’-9”/1.75m Wide Machines
4620080 All Australian Machines
Electric Machines: Ref.
4620056 6’-6”/2m Wide Machines Built Prior To December
1992
4620082 6’-6”/2m Wide Machines Built December 1992 to
Present
4620042 5’-9”/1.75m Wide Machines
TURNTABLE BEARING INSTALLATION Ref.
0238511 Machines with 8.75" & 9.5" Tires Ref. B
0250860 Machines with 8.75" & 9.5" Tires Ref. B
0255117 Machines with 12" Tires Ref. —
1 0440067 Bearing, Turntable 1
2 3538437 Spacer, Bearing (Machines with 12" Tires Only) 1
3 0682020 Bolt 5/8”-11NC x 2 1/2” (Grade 8) 14
4 4740004 Washer, Hardened 11
5 3300183 Nut 5/8”-11NC (Grade 8) 14
6 0681820 Bolt 1/2”-13NC x 2 1/2” (Grade 8) (8.75" x 9.5" Tires) 12
0681844 Bolt 1/2”-13NC x 5 1/2” (Grade 8) (12" Tires) 12
7 4740003 Washer, Hardened 12
8 Not Used
9 4740048 Washer, Special 3
10 2160001 Fitting, Grease - 90°
— — — — — — — — — —
0100019 Loctite #271 A/R
0100004 Devcon (Not Required on Machines with Milled A/R
Frame and Turntable)
0238523 SWING DRIVE INSTALLATION - MACHINES BUILT
THROUGH 1992 Ref. E
101 0920074 Swing Brake Assy (See Figure 2-10 for Breakdown) 1
102 3160147 Swing Motor Assy (See Figure 2-11 for Breakdown) 1
103 2440056 Pinion 1
104 0080148 Adapter 1
105 0560793 Block, Clamp 1
106 4740018 Washer 1
107 0641608 Bolt 3/8”-16NC x 1" 1