JLG 80H ANSI Parts Manual - Manual (Page 297)

3120272 3-11
SECTION 3 BOOM
S
E
C
T
I
O
N
3
B
O
O
M
182
4100026
Sleeve, Hose (August 1995 to Present) 30 in./76cm
183 Rod, Hanger Options: A/R
3840844 Standard Controls 80HX & 80H 1
3841014 Hydraulic Controls 80HX & 80H Prior to May 1992 1
3840844
Hydraulic Controls 80HX & 80H May 1992 to
Present 1
3840844 Standard Controls 80HX +6 & 86HX 1
184 1670836 Cover, Boom (Located on Bottom of Boom Sections)
(Not Shown) (S/N 34105 to Present) 6
CHAIN ADJUSTER ASSEMBLIES Ref.
0236758 Extend Chain Ref. —
0236294
Retract Chain Ref. D
201 3509182 Plate 2
202 Not Used
203
0630374
Eyebolt 1
204
Not Used
205 0630347 Bolt 1/2"-13NC x 2 1/4" (Grade 8) 2
206
3450405
Pin, Cotter 1/8" x 1 1/4" 2
207
3311803
Nut, Slotted 1/2"-13NC 2
208 3421142 Pin, Clevis 3/4" x 2" 1
209 3450505 Pin, Cotter 5/32" x 1 1/4" 1
210 4712200 Flatwasher 3/4" Narrow 1
211 to 250
Not Used
251 Block, Chain Attach Options: 2
0560644 Extend Chain
0560588
Retract Chain
BOOM TAPE INSTALLATION Ref.
0237241 Standard Ref. A
0250752
CSA/2:1 Stability (80HX) Ref. —
0238156
CSA/2:1 Stability (80H) Ref. —
301 4420018 Tape - Blue A/R
Standard Spec 193.9 in.
CSA/2:1 Stability Spec (80HX) 171.8 in.
CSA/2:1 Stability Spec (80H) 179.9 in.
302 4420016 Tape - Yellow A/R
Standard Spec 34 in.
CSA/2:1 Stability Spec 42 in.
303 4420017 Tape - Red A/R
Standard Spec 39 in.
CSA/2:1 Stability Spec (80HX) 53 in.
CSA/2:1 Stability Spec (80H) 45 in.
FIGURE 3-1. BOOM ASSEMBLIES (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.