Engine oil, Engine oil -12 – JLG G6-23A Operator Manual User Manual
Page 104
Advertising
Section 7 - Lubrication and Maintenance
7-12
31200192
Engine Oil
A. Engine Oil Level Check
1. Perform “Shut-Down Procedure” on page 4-3.
2. Open the engine cover.
3. Remove dipstick (1) and check oil mark. The oil should be between the full (2)
and add (3) marks within the crosshatched area of the dipstick.
4. If oil is low, remove oil fill cap (4) and add motor oil to bring oil up to the full mark
in the crosshatch area.
5. Replace oil fill cap and dipstick.
6. Close and secure the engine cover.
8
OW1150
OW1020
OAH0080
3
2
ADD
1
4
Advertising
This manual is related to the following products: