JLG G6-23A Operator Manual - Manual (Page 40)

Section 3 - Controls and Indicators
3-6 31200192
Ignition
• Position 0 - Engine off
• Position I- Voltage is available for all electrical functions. Engine preheat at
temperature below 32°F (0°C). Wait to start engine until preheat indicator light on
instrument panel goes out.
• Position II- Prohibits rotating key switch to position 3 in the event the engine does
not start. Rotate the key to position 0 then back to position 3 to re-engage the
starter.
• Position III- Engine start.
OZ1110
I
II
III
0