JLG G6-23A Operator Manual - Manual (Page 41)

Section 3 - Controls and Indicators
3-7 31200192
Park Brake
The Park Brake Lever (4) controls the application and release of the park brake.
• Pull back to apply.
• Lift detent ring (5) and push forward to release.
Parking Procedure
1. Using service brake, stop telehandler in an appropriate parking area.
2. Follow “Shut-Down Procedure” on page 4-3.
WARNING
MACHINE ROLL-AWAY HAZARD. Always move park brake lever to "ON"
position, lower boom to ground and stop engine before leaving cab. Machine
roll-away could cause death or serious injury.
WARNING
CRUSH HAZARD. Turning engine off applies the park brake. Applying park brake
or turning engine off while traveling will cause unit to stop abruptly and could
cause load loss, resulting in death or serious injury. Either may be used in an
emergency situation.
OAH0680
4
5