JLG G6-23A Operator Manual - Manual (Page 42)

Section 3 - Controls and Indicators
3-8 31200192
Transmission Control Lever
Transmission control lever (1) engages forward or reverse travel.
• Lift and push lever forward for forward travel; lift and pull lever rearward for
reverse travel. Move lever to centered position for ‘Neutral’.
• Forward or reverse travel can be selected while in any gear.
• When traveling in reverse, the back-up alarm will automatically sound.
• Drive in reverse and turn only at slow rates of speed.
• Do not increase engine speed with the transmission in forward or reverse and the
service brake depressed in an attempt to get quicker hydraulic performances.
This could cause unexpected machine movement.
WARNING
TIP OVER/CRUSH HAZARD. Bring telehandler to a complete stop before
shifting transmission control lever. A sudden change in direction of travel could
reduce stability and/or cause load to shift or fall. Failure to comply could result in
death or serious injury.
OAH0690
N
F
R
1