JLG G6-23A Operator Manual - Manual (Page 87)

Section 5 - Attachments
5-23 31200192
Personnel Work Platform
The operator and personnel in platform must read and understand the
separate personnel work platform manual prior to installing and using a
platform.
Preparation and Setup
1. Check to ensure the personnel platform is securely attached at the Quick
Switch™ or is securely attached to the forks and/or carriage if using fork
mounted personnel work platform. Follow installation procedure on page 5-7 for
JLG Quick Switch™ mounted personnel work platforms.
2. Ensure the telehandler is on a firm surface and is level.
3. Engage the park brake. Blocking the wheels is also recommended.
4. Level the platform, both side to side (frame sway) and front to back
(attachment tilt).
5. Keep area under the platform free from personnel.
6. DO NOT lift or carry persons in the bucket or on forks.
Never tilt the platform forward, rearward, or sway the machine when the platform is
occupied. Serious injury or death could result.