Blaupunkt HEIDELBERG RCM 126 User Manual

Page 14

Advertising
background image

39

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

For this purpose, you may start Travelstore
seek operation:
•

Press FM for two seconds; the system
starts to run through the frequency
band.

If “AF” does not light up,
•

press AF.

With this, the requirements for selecting sta-
tions with << >> are fulfilled.

Changing the memory bank

You can shift between the memory banks I,
II and T in order to store stations and recall
them later.
The currently selected memory bank is in-
dicated in the display.
•

Press the FM button as many times
until the desired memory bank lights
up in the display.

Storing stations

On FM, you can store six stations on the
preset buttons 1 to 6 for each of the memo-
ry banks I, II and T.
•

Select the desired memory bank.

•

Tune in a station with the rocker switch
(either automatically or manually).

•

Press the desired preset button until
the radio resumes play after the mu-
ting (takes approximately 2 seconds,
confirmed by beep).

Now the station has been stored.
The activated preset button is indicated in
the display.

Notice:
Should you tune in a station which has al-
ready been stored before on another
memory bank, the corresponding preset but-
ton and the memory bank will briefly flash in
the display.

Automatically storing the stron-
gest stations with Travelstore

You can automatically store the six most
powerful FM stations of your current recep-
tion area sorted according to their signal
strength. This function is particularly con-
venient on longer trips.
•

Press the TS button for two seconds.

“T-STORE” will appear in the display.
The six strongest FM stations will be auto-
matically stored on the memory bank “T”
(Travelstore). When this process has been
completed, the radio will play the first sta-
tion.

Manual tuning with << >>

You can also tune in a station manually.

Condition:
AF and PTY must be switched off (i.e. the
symbols do not light up in the display).

If necessary, deactivate these functions:
•

Press AF or PTY.

Manual tuning:

•

Press << >>; the frequency will change
in short intervals in downwards or up-
wards direction.

When holding the right or left part of the rock-
er switch depressed, the frequency scan is
speeded up.

Scrolling through the broad-
casting networks

You can use the << >> buttons to tune in
stations of your reception area.
If several programmes of the broadcasting
networks can be received, you can scroll
through them in forwards direction pressing
>>, or backwards using the << button, e.g.
NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE ...
For this it is necessary that the stations have
been tuned in at least once and that “AF” is
active (lights up in the display).

Heidelbg RCM126 gb®

07.06.2002, 12:46 Uhr

39

Advertising