JLG 3248RS/10RS Operator Manual - Manual (Page 42)

SECTION 3 - MACHINE CONTROLS, INDICATORS AND OPERATION
3-10 – JLG Lift – 3121272
Platform Emergency Stop Switch - (Item 8 - Figure 3-6.)
NOTE:
Both the ground and platform emergency stop buttons must be
set to ON in order to operate the machine.
When power is directed to the platform from the ground control sta-
tion, the platform emergency stop switch is turned on by pulling the
switch out (on), and is turned off by pushing the switch in (off ). The
two-position, red, mushroom-shaped emergency stop switch functions
to provide power to the platform control station and also to turn off
power to machine functions in the event of an emergency.
Lift/Drive Select - (Item 10 - Figure 3-6.)
NOTE:
When selecting between the Lift and Drive functions the joystick
control must be returned to the neutral position for approxi-
mately 1/2 second before the function change is operable.
This toggle switch is used to select operation of either the drive or lift
function. After selecting a function, the joystick controller must be
moved in the proper direction in order to activate that function. Only
change the function selected, with the joystick in the neutral position.
Otherwise, the function selected will not change until the joystick is
returned to the neutral position.
Forward/Reverse/Lift/Lower Direction
Decal
- (Item 4 - Figure 3-6.)
This decal indicates the proper direction to mount
the platform control box, the black arrow must
point to the front of the machine. The black/white
arrow also indicates the direction to move the joy-
stick control per the lift/drive selector switch decal
for the lift and drive select functions.
1001132362 B