JLG 3248RS/10RS Operator Manual - Manual (Page 64)

SECTION 4 - EMERGENCY PROCEDURES
4-2 – JLG Lift – 3121272
2. Grasp the T-handle and slowly pull out to lower the scissor
arms/platform, when the platform is lowered to desired
level, allow the T-handle to return to it’s closed position. 4.4 INCIDENT NOTIFICATION
JLG Industries, Inc. must be notified immediately of any incident involv-
ing a JLG product. Even if no injury or property damage is evident, JLG
must be contacted by telephone and provided with all necessary
details.
USA: 877-JLG-SAFE (554-7233)
EUROPE: (44) 1 698 811005
AUSTRALIA: (61) 2 65 811111
E-mail: [email protected]
Failure to notify the manufacturer of an incident involving a JLG Indus-
tries product within 48 hours of such an occurrence may void any war-
ranty consideration on that particular machine.
NOTICE
FOLLOWING ANY INCIDENT, THOROUGHLY INSPECT THE MACHINE. DO NOT
ELEVATE PLATFORM UNTIL YOU ARE SURE THAT ALL DAMAGE HAS BEEN
REPAIRED, AND THAT ALL CONTROLS ARE OPERATING CORRECTLY. TEST ALL
FUNCTIONS FIRST FROM THE GROUND CONTROL STATION, THEN FROM THE
PLATFORM CONTROL CONSOLE.
Figure 4-1. Location of Manual Descent Control
(Right Rear of Machine - All Machines)