JLG 3248RS/10RS Operator Manual - Manual (Page 72)

SECTION 5 - GENERAL SPECIFICATIONS AND MAINTENANCE
5-8 – JLG Lift – 3121272
Lubrication Specifications
Table 5-10. Lubrication Specifications
KEY SPECIFICATIONS
MPG Multipurpose Grease having a minimum dripping point of 350° F. Excel-
lent water resistance and adhesive qualities, and being of extreme pres-
sure type. (Timken OK 40 pounds minimum.)
EPGL Extreme Pressure Gear Lube (oil) meeting API service classification GL-5 or
MIL-Spec MIL-L-2105.
HO JLG Recommends -Mobil DTE 10 EXCEL 15
ATF - Automatic Transmission Fluid
Mobil EAL ENVIRONSYN H 32
Mobil EAL HYDRAULIC OIL 32
Table 5-11. Hydraulic Oil Specifications
SPECIFICATION
MOBIL
DTE 10
EXCEL 15
MOBIL EAL
ENVIRONSYN
H 32
MOBIL EAL
HYDRAULIC OIL 32
ISO Viscosity Grade #15 #32 #32
Spec Gravity API 31.9 0.950 —
Pour Point, Max
-40° F
(-40° C)
-59° F
(-51° C)
-38.2° F
(-39° C)
Flash Point, Min. 330° F (166° C) 514.4° F (268° C) 478° F (248° C)
VISCOSITY SPECIFICATIONS
at 40° C 15 cSt 33.1 cSt 32 cSt
at 100° C 4.1 cSt 6.36 cSt 7 cSt
at 100° F 80 SUS — —
at 210° F 43 SUS — —
cp at -30° F 3.2 — —
Viscosity Index 140 147 189
Operating Temp — -20° F (29° C) - 200° F (392° C)
1001102685_3