JLG 450A_AJ Series II Parts Manual - Manual (Page 265)

3121244 450A & 450AJ Series II 4-3
SECTION 4 PLATFORM
FIGURE 4-1. PLATFORM INSTALLATION
ITEM # PART NUMBER QTY. DESCRIPTION REV.
Ref PLATFORM ASSEMBLY WITH GATE
Use 1001144025 Ref 6ft (1.83m) with No Mesh (was p/n 3510832) B/L
Use 1001144026 Ref 5ft (1.52m) with No Mesh (was p/n 3510831) B/L
Use 1001144027 Ref 4ft (1.22m) with No Mesh (was p/n 3510830) B/M
Ref Note: Original Equipment platform may have been replaced
with Service Replacement platform. Identify platform
before ordering parts.
Ref Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See SPECIAL OPTIONS SECTION for
Mesh Installations.
Ref Note: Replacement Decals Must Be Ordered Separately -
See DECAL SECTION.
1 Not Used 0
2 2080040 16 Fastener, Huck
3 2600281 2 Hinge, Self-Closing
4 2940074 1 Latch
5 3820020 2 Rivet, Pop
6 See Note 0 Platform Weldment (Note: Purchase Platform Assembly)
7 3520072 1 Cap-Plug
8 to 10 Not Used
11 1 Gate Weldment Options:
4846452 Gate for Original Equipment Platform p/n 3510830,
3510831, 3510832
1001144629 Gate for Service Replacement Platform p/ns 1001144025,
1001144026, 1001144027
12 3520198 2 Plug, Square Tube
Ref PLATFORM ASSEMBLY WITH DROP-BAR
Use 1001144020 Ref 6ft (1.83m) with No Mesh (was p/n 1001138433) B/B
Use 1001144019 Ref 5ft (1.52m) with No Mesh (was p/n 1001138432) B/B
Use 1001144018 Ref 4ft (1.22m) with No Mesh (was p/n 1001138431) B/B
Ref Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See SPECIAL OPTIONS SECTION for
Mesh Installations.
Ref Note: Replacement Decals Must Be Ordered Separately -
See DECAL SECTION.
51 0100011 AR Compound, Locking
52 0641418 2 Bolt 1/4in-20NC x 2-1/4in
53 0961845 2 Bushing
54 3290606 2 Nut M6
55 3300151 2 Nut, Acorn
56 See Note 1 Platform Weldment (Note: Purchase Platform Assembly)
57 3520198 2 Cap-Plug
58 4010618 2 Screw M6 x 50mm
59 4711400 4 Flatwasher 1/4in
60 4811700 2 Flatwasher M6
61 1001138494 1 Bar, Drop
62 1001138514 1 Rail (Top)