JLG 70H Parts Manual - Manual (Page 13)

3120290 1-5
S
E
C
T
I
O
N
1
F
R
A
M
E
SECTION 1 FRAME
16 Cone, Bearing Options: 4
0440019 Standard Machines
0440171 Machines With 750 Capacity
17 Cup, Bearing Options: 4
0440018 Standard Machines
0440170 Machines With 750 Capacity
18 Not Used
19 Not Used
20 3312602 Nut, Jam 1”-80NC 2
21 0440091 Washer, Thrust 3
22 2160002 Fitting, Grease 5
23 Hardware Options: 1
3300175 Locknut (Prior to May 1992)
0642632 Bolt 1”-8NC x 4” (May 1992 to Present)
24 0560605 Block, Tie-Rod (RH) 1
25 3323002 Nut, Jam 1 1/4 - 12NF 1
26 Not Used Spindle (LH) Options: 1
4130229 Standard Machine (Prior to May 1992)
4130235 Machines With 750 Capacity (Prior to May 1992)
4130250 CSA Machine (Prior to May 1992)
4130275 Standard Machine (May 1992 to Present)
4130278
Machines With 750 Capacity (May 1992 to Pres-
ent)
0960523 Bushing, Bronze 2
27 0642630 Bolt 1”-8NC x 3 3/4” 2
28 3450606 Pin, Cotter 3/16” x 1 1/2” 1
29 3431622 Pin, Clevis 1” x 2 3/4” 1
30 4712600 Flatwasher 1” Narrow 1
31 Not Used Spindle (RH) Options: 1
4130228 Standard Machine (Prior to May 1992)
4130234 Machines With 750 Capacity (Prior to May 1992)
4130249 CSA Machine (Prior to May 1992)
4130274 Standard Machine (May 1992 to Present)
4130277
Machines With 750 Capacity (May 1992 to Pres-
ent)
0960523 Bushing, Bronze 2
32 3520048 Plug, Tapered (Prior to November 1986 Only) 2
33 0100011 Loctite #242 (Not Shown) A/R
34 0560605
Block, Tie-Rod (RH Thread) (Used Prior to May
1986)
1
0560714
Block, Tie-Rod (LH Thread) (Used May 1986 to Pres-
ent)
1
35 3323002
Nut, Jam 1 1/4”-12NF (RH Thread) (Used Prior to
May 1986)
1
3300229
Nut, Jam 1 1/4” - 12NF (LH Thread) (Used May 1986
to Present)
1
36 3450810 Pin, Cotter 1/4” x 2 1/2” 2
3451010 Pin, Cotter 5/16” x 2 1/2” 2
FIGURE 1-1. FRAME AND STEERING INSTALLATION - 2WD (CONTINUED)
FIG & ITEM # PART NUMBER DESCRIPTION QTY. REV.