Black Box ACS251A - Manual (Page 23)

22
SERVSWITCH™ BRAND FIBER KVM EXTENDER II AND II-SM
5. Operation
Once the ServSwitch™ Brand Fiber KVM Extender II or II-SM is installed and
powered, it will perform keyboard/video/mouse extension to the remote site
continuously. It will also perform ongoing keyboard/mouse switching if you have
both local and remote user stations attached. The Extender will display these
indications:
• The Status LED on the front of the Local Unit will be steadily lit during normal
operation; it will flash if no video signal is being received from the CPU.
• The Status LED on the front of the Remote Unit will be steadily lit during
normal operation; it will flash (and “NO SIGNAL” will appear on the remote
monitor) if no video signal is being received from the Local Unit. (“NO FIBER
LINK” will appear on the remote monitor if the Remote Unit is unable to
detect the presence of the Local Unit at all. This might happen if the Local
Unit loses power or the fiber cabling is disconnected or damaged.)