JLG 860SJ Operator Manual - Manual (Page 47)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3121630 – JLG Lift – 3-7
9. Jib (If Equipped)
This switch provides raising and low-
ering of the jib.
ONLY USE THE PLATFORM LEVELING OVERRIDE FUNCTION FOR SLIGHT LEVELING OF
THE PLATFORM. INCORRECT USE COULD CAUSE THE LOAD/OCCUPANT TO SHIFT OR
FALL. FAILURE TO DO SO COULD RESULT IN DEATH OR SERIOUS INJURY.
10. Platform Leveling Override
A three position switch allows the
operator to adjust the automatic self
leveling system. This switch is used to
adjust platform level in situations
such as ascending/descending a
grade.
11. Platform Rotate
Provides rotation of the platform.