JLG 15SP Operator Manual - Manual (Page 43)

SECTION 4 - MACHINE OPERATION
3120774 – JLG Lift – 4-9
white button) on the platform control panel simultane-
ously. Upon reaching desired elevation level release UP
and FUNCTION ENABLE buttons.
ENSURE AREA BENEATH PLATFORM IS FREE OF PERSONNEL AND
OBSTRUCTIONS PRIOR TO LOWERING PLATFORM.
4. To LOWER platform, depress FUNCTION ENABLE BUT-
TON (green) and PLATFORM DOWN BUTTON (bottom,
white button) on control panel simultaneously. Upon
reaching desired elevation level release DOWN and
FUNCTION ENABLE buttons.
Auxiliary Lowering Switch (Option): To lower the platform using
the auxiliary lowering switch, be certain the emergency stop switch
on the platform control panel is set to the reset (on) position. Press
and hold both the (green) function enable button on the control
panel and the auxiliary lowering switch, on the side of the mast
behind the control panel, until platform is lowered.
NOTE: Machines equipped with platform gate alarm (option), the
platform must be completely lowered when exiting the
platform or the platform gate alarm will sound.
4.5 PLATFORM CONFIGURATIONS
Platform Loading
The platform maximum rated load capacity is shown on a placard
located on the platform control panel and is based upon the fol-
lowing criteria.
Maximum capacity for the SP model is as follows:
* Distribute weight evenly over the platform base.
Table 4-1. Maximum Platform Capacity.
PLATFORM TYPE PLATFORM CAPACITY
12/15SP
ANSI
USA/Latin America
CSA
(Canada)
StockPicker
(28 in. X 48 in.)
500 lb. (227 kg)
* 250 lb. (113kg) Front -
* 250 lb. (113kg) Rear
400 lb. (182 kg)
* 200 lb. (91kg) Front -
* 200 lb. (91kg) Rear
Extendible
26 in. X 49 in.
500 lb. (227 kg)
* 250 lb. (113kg) Front -
* 250 lb. (113kg) Rear *
400 lb. (182 kg)
* 200 lb. (91kg) Front -
* 200 lb. (91kg) Rear
Side Entry with Tray
23 in. X 27 in.
500 lb. (227 kg)
250 lb. (113kg) Tray -
250 lb. (113kg) Platform
400 lb. (182 kg)
200 lb. (91kg) Tray -
200 lb. (91kg) Platform