JLG 15SP Operator Manual - Manual (Page 48)

SECTION 4 - MACHINE OPERATION
4-14 – JLG Lift – 3120774
4.6 QUICK-CHANGE PLATFORM MOUNTING
Quick-Change platform mounts which allow quick removal and
installation of currently available quick-change platforms.
NOTE: 12/15SP Models require the installation of the Quick-
Change mount kit to use Quick-Change Platforms.
Platform Removal
5. Remove the platform control console from the platform and
lay aside.
6. Remove both upper and lower mount attach pins securing
the platform support rails to the mast mounting channels.
7. Swing and lift the platform out of the mounts and lay aside.
Platform Installation
1. Set platform in upper and lower mounts.
2. Install attach pins in upper and lower mounts.
3. Attach platform control console to platform rail.
ENSURE ALL PINS AND FASTENERS ARE INSTALLED AND SECURE
PRIOR TO OPERATION.
1. Upper Platform Mount
2. Upper Mount Attach Pins 3. Lower Platform Mount
4. Lower Mount Pins
1
3
2
4